LiveScrypt User Guide
Connect the network and power on
l
The cost is $9.95 USD per transcription hour with a one hour minimum.
l
The first five minutes of a transcription session is free. After five minutes, you’re billed a minimum of
one hour.
l
For sessions longer than one hour, additional charges at the rate of $9.95 USD per transcription hour
applies. For example, a session that is 61 minutes long is billed for two transcription hours.
l
Your credit card is charged once at the end of the 30-day billing cycle. The billing cycle begins the date
credit card information was added to your account to enable the LiveScrypt transcription service for a
team.
To create an account and enable transcription services:
1. Using your web browser, go to
2. Select the
Billing/Usage
icon, and then select
CHANGE PLAN
on the Billing / Usage page.
You can also
Add a payment method
from the
LiveScrypt
devices page. A banner
displays if no transcription service plan is configured.
3. Follow the prompts and enter your billing and credit card information. When you're done, select
Confirm billing
. Owners can modify their billing information at any time.
Connect the network and power on
If your network uses DHCP, then all you need to do is connect the LiveScrypt device to your network using a
standard RJ-45 Ethernet cable. An IP address is automatically assigned to the device.
14
