epiphan KVM2Ethernet, Руководство пользователя

Страница: 48 / 188

3. Windows VGA2Ethernet user interface Menus
Page 48 VGA2Ethernet
Start
Recording
Start recording the current image to a video file or
a series of image files.
Stop
Recording
Stop recording the current image.
Pause
Pause or resume image capturing. If you select
pause the VGA2Ethernet user interface stops
displaying new captured images and the image
captured when you selected Pause is displayed.
Pause also pauses recording a video, saving
image files, and web broadcasting. Select pause
again to resume displaying captured images and
resume recording or web broadcasting.
Select
Device
If you have more than one VGA2Ethernet or
KVM2Ethernet device connected to the network,
you can use Select Device to choose the device
that the VGA2Ethernet user interface receives
captured images from. The command finds and
lists all of the VGA2Ethernet and KVM2Ethernet
devices on your network. The list displays the
serial number, device type, captured image
resolution and frequency (status) and location of
each device (see Figure 21 on page 49 ). You can
also use this command to select the device to
configure with the Configure Device command.
If a viewer’s password has been added to the
device, the device’s status is listed as protected in
the select device list and you must enter the
viewer’s password to connect to the device. See
“Adding or Changing the Viewer’s Password” on
page 108 .
Connect
Network
Device
Enter or select the IP address of a VGA2Ethernet
or KVM2Ethernet device on the network. Use this
option instead of Select Device to connect to a
device if you know its IP address. You can also
use this option to attempt to connect to a device
that does not appear in the select device list.