epiphan KVM2Ethernet, Руководство пользователя

Страница: 21 / 188

2. Installation and Getting Started Installing the Drivers and Application for Windows
User Guide Page 21
Installing the Drivers and Application
for Windows
To view and record images captured by the VGA2Ethernet device
and to use the KVM2Ethernet device to manage a machine with
KVM input, you must install the VGA2Ethernet or
KVM2Ethernet drivers and application on a video capture
workstation. The drivers and application include the following
components:
• The
Epiphan device drivers that receive captured images
from the VGA2Ethernet or KVM2Ethernet device over the
network.
• The VGA2Ethernet user interface that you can use to view,
print, save, record and broadcast captured images and enable
KVM.
• The Network Discovery Utility that you can use to find
Epiphan devices connected to the network.
Once the drivers and application are installed, you can start the
VGA2Ethernet user interface by selecting Start > Epiphan
VGA2Ethernet > VGA2Ethernet GUI . The user interface starts
up and in most cases should find the VGA2Ethernet or
KVM2Ethernet device if the device is connected to your network
and operating.
If the VGA2Ethernet user interface cannot find the device you can
start the Network Discovery Utility by selecting Start > Epiphan
VGA2Ethernet > VGA2Ethernet DirectShow config .
This section assumes your network has a DHCP server and that
the DHCP server gives the Epiphan device an IP address on your
network. If your network does not have a DHCP server, see “If
the Network Does Not Have a DHCP Server” on page 126 .