epiphan KVM2Ethernet, Руководство пользователя

Страница: 104 / 188

6. Web admin interface Logging Into the Web admin interface
Page 104 VGA2Ethernet
Logging Into the Web admin interface
You can log into the Web admin interface:
• From a Windows video capture workstation, by selecting
Web
Config from the Network Discovery Utility.
• From any video capture workstation using any web browser.
To log into the Web admin interface you need the
VGA2Ethernet or KVM2Ethernet device IP address which you
can get from the Network Discovery Utility on a Windows
video capture workstation, or by selecting Connect Network
Grabber on the File menu on a Mac video capture workstation,
or from your DHCP server if this server assigned an IP
address to the device.
Note: You can always log into the Web admin interface by
browsing to the default VGA2Ethernet or KVM2Ethernet IP
address, which is http://192.168.255.250 . To log into a device
using this IP address you must change the IP Address of the
video capture workstation to the static IP address 192.168.255.249
and netmask 255.255.255.252. Then open a Web browser and
browse to http://192.168.255.250 .
To log into the Web admin interface from a Windows
video capture workstation using the Network Discovery
Utility
1 Start the Network Discovery Utility.
2 If the device that you want to connect to does not appear,
select Search to find it.
3 Select the device to log into and select Web config .
You can log into any VGA2Ethernet or KVM2Ethernet with a
status of Device OK .
A web browser starts and you are prompted for a user name
and password.
4 Enter the following:
User Name: admin
Password: (no password required unless you have added one)