epiphan video Pearl Nano, Руководство пользователя

Страница: 361 / 484

Pearl Nano User Guide Configure AFU to CIFS server parameters
6. (Optional) Select the Checksum check box to add a checksum validation to the transfer between
the system and the recipient server.
7. Click Apply .
Configure AFU to CIFS server parameters
You can automatically upload recordings to a CIFS server (also known as SMB or samba) when you select
CIFS as the AFU protocol transfer type using the Admin panel. Samba version 1 is supported.
The following table describes the parameters to configure AFU to a CIFS server.
Table 59 CIFS Automatic File Upload Configuration Parameters
Name Description
Server Port
The CIFS server port. Leave blank to use the default port, or enter the port used for
your CIFS server.
Server
address
The IP address (or fully qualified domain name) of the CIFS server.
Server share The name of the shared folder on the CIFS server.
Domain
The CIFS server's Windows domain or Work Group name . Needed if the server is part
of Active Directory or a Domain Controller.
Login Username for the CIFS server.
Password Password for the CIFS user.
Use temp file
Causes files to be named with .part extension on the server during active upload. When
the upload completes, the file is renamed to the appropriate extension (.mov, .mp4, .ts
or .avi).
Prerequisites
l
The channel is already added for AFU, see Set the channel to include in AFU .
l
AFU is enabled and the parameters configured, see Enable AFU, schedule, and set options .
Configure AFU upload to a CIFS server using the Admin panel
1. From the Automatic File Upload configuration page, select CIFS Client as the protocol transfer
type.
348