epiphan video Pearl Nano, Руководство пользователя, Страница: 118 / 484

Pearl Nano User Guide Assign audio sources to an input
3. Highlight Stereo pair and press the check mark key to toggle the switch on or off.
Assign audio sources to an input
Some audio input ports share internal audio processing resources in Pearl Nano. These shared audio
sources appear in the same configuration menus in the Admin panel and appear under the same audio
input label in the user interfaces.
The audio sources that share resources are:
l
XLR 1 and XLR 2 (left and right ports, respectively)
l
RCA (left and right ports)
Both the XLR (left/right) and RCA (left/right) audio sources appear under the label XLR/RCA Audio . You
can assign one or both audio sources to XLR/RCA Audio . Choosing one audio source for the shared input
disables the other audio source. This means that when you select XLR/RCA Audio as the audio source
using the custom layout editor, only the audio source you assign to XLR/RCA Audio is used. Both audio
sources are assigned by default.
To avoid unwanted signal noise on the RCA ports, we recommend adding no more than 12dB
of gain when RCA or XLR+RCA is selected.
Assign the audio source to an input using the Admin panel
1. Login to the Admin panel as admin . See Connect to Admin panel .
2. From the Inputs menu, select the shared audio source. The audio configuration page opens.
105