Pearl Mini User Guide
Start/stop scheduled CMS events using the
Admin panel
Start/stop scheduled CMS events using the Admin panel
You can start scheduled CMS events from the Events menu using the Admin panel and stop events before
their scheduled end time. After an event ends, the recorded video files upload automatically to the CMS.
Important considerations
l
If you manually stop a scheduled Panopto VOD event before the scheduled end time when the
Pearl device doesn't have network connectivity, the Pearl device uploads the completed event's
recording when network connectivity resumes. However, Panopto does not recognize that the
event has ended. The event remains in the In Progress state in Panopto and you must wait until the
original event's scheduled end time before creating a new event using that Pearl device.
l
For multiple-source Panopto events that are manually stopped or have ended, if you use the Admin
panel to delete a locally saved recording for any channel on Pearl 2 or Pearl Mini that hasn't yet
uploaded to Panopto as part of the multiple-source event, that event remains in the In Progress
state indefinitely in Panopto.
l
Do not power down a Pearl device while a scheduled webcast event is in progress. The webcast
ends but the RTMP stream that was created automatically on the Pearl device is not deleted from
the channel's Streaming page. Use the Admin panel to manually delete the webcast stream
instance from the channel's Streaming page.
Start a scheduled CMS event using the Admin panel
From the Admin panel, select the Events menu and click
Start
beside the scheduled event on the Events
page.
432
