Pearl Mini User Guide
Configure AFU to FTP server parameters
3. Check
Enable Automatic File Upload
.
4. (Optional) Enter a remote path. If no path is specified, the files are copied to the root folder of the
destination file system.
5. (Optional) Check any optional parameter to select it. For example, you can check
Mark file as
downloaded
and
Create a subfolder for each channel
.
6. To schedule AFU, check
File upload schedule
and select a start time and an end time in the
Start
upload
and
Stop upload
fields to define the automatic file upload period.
7. Click
Apply
.
If AFU to your server fails, check the server configuration and permissions.
Configure AFU to FTP server parameters
You can automatically upload recordings to an FTP server when you select FTP as the AFU protocol
transfer type using the Admin panel.
The following table describes the parameters to configure for AFU to an FTP server.
Table 63
FTP Automatic Upload Configuration Parameters
Name
Description
Server
address
The IP address (or fully qualified domain name) of the FTP server.
Server port
The port used by the target FTP server. Standard port is 21.
Login
User name for the FTP server.
Password
Password for the FTP user.
Use temp file
Causes files to be named with .part extension on the server during active upload. When
the upload completes, the file is renamed to the appropriate extension (.mov, .mp4 or
.avi).
364
