SDI2USB 3.0 User Guide
Configure optional recording settings
Step 2: Enable audio capture
You can tell whether audio capture is enabled by looking at the toolbar. If the speaker icon is still (no
sound waves depicted com ing out from it), audio is not enabled. See the exam ples below.
Audio enabled
Audio disabled
To enable audio capture:
1. Launch the Epiphan Capture Tool.
2. Click the Capt ure Audio button (speaker icon) on the toolbar; when audio capture is enabled, the
icon is anim ated with sound waves.
To disable audio capture:
1. Click the Capture Audio button; the icon has a static im age.
Step 3: Capture!
Use the record button on the toolbar to capture your audio/video stream !
Configure optional recording settings
When recording your captured fram es as a video, as described in
, you can set som e
optional configuration settings.
53