CAUTION!
Before commencing, disconnect the
device from the mains. There are parts that
carry mains voltage behind the cover. Never
leave unsupervised when it is open. (Prevent
non specialists and especially children from
gaining access to it.)
Never remove this product from the
electrical baseplate. Disconnect from mains
supply in the event of any damage to any
buttons. Do not use sharp tools to push any
button.
R47-RF - 4 Zone RF Programmer
Operating Instructions
Page 1 of 2
Lower the cover on the front of the unit. Move the selector switch to the
PROG SET position. You can now program zone 1.
Press the
or
buttons to adjust the P1 ON time.
Press the
or
buttons to adjust the P1 OFF time.
Repeat this process to adjust the ON & OFF times for P2 & P3.
Press
and repeat the above process to adjust for Zone2.
Press
and repeat the above process to adjust for Zone3.
Press
and repeat the above process to adjust for Zone4.
When completed, move the selector switch to the RUN position.
4. Setting the date and time
1. Factory default settings
7. Reviewing the program settings
8. Boost function
6. Adjusting the program settings
2. Factory program settings
Program:
5/2D
Backlight:
On
Keypad:
Unlocked
Frost Protection:
Off
Lower the cover on the front of the unit.
Move the selector switch to the PROG SET position.
By pressing this will review each of the ON/OFF times for P1 to P3 for
Zone 1.
Press and repeat the above process to adjust for Zone 2.
Press and repeat the above process to adjust for Zone 3.
Press and repeat the above process to adjust for Zone 4.
When completed, move the selector switch to the RUN position.
This function allows the user to extend the ON period for 1, 2 or 3 hours. If the
zone that you wish to Boost is timed to be OFF, you have the facility to switch
it ON for 1, 2 or 3 hours.
Press the required button:
for Zone 1, for Zone 2, for Zone 3 and for Zone 4 -
once, twice or three times respectively.
To cancel the boost function, simply press the respective boost button again.
3. Resetting the programmer
Press
Press
Press
Press
Press
Press
Press
Press
Contents
1. Factory default settings
2. Factory program settings
3. Resetting the programmer
4. Setting the date and time
5. ON/OFF period selection
6. Adjusting the program settings
7. Reviewing the program settings
8. Boost function
9. Advance function
10. Holiday mode
11. Connect RF thermostat with the programmer
12. Disconnect RF thermostat from the programmer
13. Backlight mode selection
14. Keypad lock and unlock
15. Copy function
16. Frost protection
17. Master reset
This 4 zone RF programmer is designed to
provide ON/OFF control for 4 zones, with
the value added application of in built
frost protection.
It is necessary to press the RESET button prior to initial programming.
This button is located behind the cover on the front of the unit.
Lower the cover on the front of the unit.
Move the selector switch to the CLOCK SET position.
Press the
or
buttons to select the day.
Press the
or
buttons to select the month.
Press the
or
buttons to select the year.
Press the
or
buttons to select the hour.
Press the
or
buttons to select the minute.
Press the
or
buttons to select 5/2D, 7D or 24H
The date, time and function are now set. Move the selector switch to the
RUN position to run the program, or to the PROG SET position to change
the program setting.
Lower the cover on the front of the unit. By pressing the button,
you can change between AUTO / ALL DAY / ON / OFF for Zone 1.
Repeat this process for Zone 2 by pressing the
button,
for Zone 3 by pressing the button,
and for Zone 4 by pressing the
button.
AUTO
The programmer operates 3 ‘ON/OFF’ periods per day.
ALL DAY The programmer operates 1’ON/OFF’ period per day.
This operates from the first ON time to the third OFF time.
ON
The programmer is permanently on. **ON**
OFF
The programmer is permanently off. **OFF**
5. ON/OFF period selection
(Continued)
5. ON/OFF period selection
There are 4 modes available on this programmer for users to choose for their
individual application.
ZONE
1
Boost
ZONE
2
Boost
ZONE
3
Boost
ZONE
4
Boost
3
4
4
4
3
3
20170302_A
W1077_R47-RF_OpI
ns_JW
Important: Keep this document
RUN
CLOCK
SET
PROG
SET
RUN
CLOCK
SET
PROG
SET
Mon-Fri
Sat-Sun
5/2D
P1 ON
P1 OFF
P2 ON
P2 OFF
P3 ON
P3 OFF
6:30
8:30
12:00
12:00
16:30
22:30
7:30
10:00
12:00
12:00
17:00
23:00
All 7 days
7D
P1 ON
P1 OFF
P2 ON
P2 OFF
P3 ON
P3 OFF
6:30
8:30
12:00
12:00
16:30
22:30
Everyday
24H
P1 ON
P1 OFF
P2 ON
P2 OFF
P3 ON
P3 OFF
6:30
8:30
12:00
12:00
16:30
22:30
RUN
CLOCK
SET
PROG
SET
EPH Controls Ireland
Sitecast Industrial Estate, Pouladuff,
Cork, T12 W665, Ireland
[email protected] www.ephcontrols.com
EPH Controls UK
Unit E4, Welland Business Park, Valley Way, Market Harborough,
Leicestershire, LE16 7PS, United Kingdom
[email protected] www.ephcontrols.co.uk
