Operating Instructions
Page 1 of 4
How your programmable thermostat works
2. Resetting the thermostat
1. LCD Symbol / button description
Manual
mode
Off mode
Program mode
Holiday mode
Time / date
Copy function
Boost mode
Automatic
mode
(Back)
OK confirm button
Set point increase
Set point decrease
Reset button
Operating mode
Current program
Day / Month
Day of the week
Temperature
Heating on symbol
Keypad lock symbol
Current Time
(Boost to time)
Contents
1. LCD symbol / button description
2. Resetting the thermostat
3. Setting the date, time and operating mode
4. Factory program settings
5. Adjusting the program settings for 5/2d
6. Copy function
7. Temporary override
8. Permanent override
9. Boost function
10. Holiday function
11. Keypad lock and unlock
12. Backlight mode selection
13. Frost protection
14. Installer Menu (without OpenTherm® connected)
15. Installer Menu (with OpenTherm® connected)
Prior to setting the thermostat, it is neccessary to
complete all required settings described in this section.
4. Factory program settings
5/2d
3. Setting the date, time and operating mode
Mon-Fri
5/2D
P1
P2
P3
P4
P5
P6
06:30
08:00
12:00
14:00
17:30
22:00
21˚C
10˚C
10˚C
10˚C
21˚C
10˚C
21˚C
10˚C
10˚C
10˚C
21˚C
10˚C
21˚C
10˚C
10˚C
10˚C
21˚C
10˚C
21˚C
10˚C
10˚C
10˚C
21˚C
10˚C
21˚C
10˚C
10˚C
10˚C
21˚C
10˚C
Sat-Sun
08:00
10:00
12:00
14:00
17:30
23:00
Mon-Fri
7D
P1
P2
P3
P4
P5
P6
06:30
08:00
12:00
14:00
17:30
22:00
Sat-Sun
08:00
10:00
12:00
14:00
17:30
23:00
P1
P2
P3
P4
P5
P6
06:30
08:00
12:00
14:00
17:30
22:00
Everyday
24H
Press the ‘
TIME
’ button once, the year will begin flashing.
Press the or buttons to adjust the year.
Press the ‘
OK
’ button.
Press the or buttons to adjust the month. Press the ‘
OK
’ button.
Press the or buttons to adjust the day.
Press the ‘
OK
’ button.
Press the or buttons to adjust the hour.
Press the ‘
OK
’ button.
Press the or buttons to adjust the minute. Press the ‘
OK
’ button.
Press the or buttons to adjust from 5/2d to 7d or 24h mode.
Press the or buttons to turn DST (Day Light Saving Time) On or Off.
Press the ‘
AUTO
’ button or wait 5 seconds and the thermostat will return to
normal operation.
5. Adjusting the program settings for 5/2d
Press the ‘
PROG
’ button once.
Programming for Monday to Friday is now selected.
Press the or buttons to adjust the P1 time. Press the ‘
OK
’ button.
Press the or buttons to adjust the P1 temp. Press the ‘
OK
’ button.
Repeat this process to adjust P2 to P6 times and temperatures.
Press the ‘
OK
’ button.
1.1 LCD Symbol description
1.2 Button description
EPH Controls Ireland
[email protected] www.ephcontrols.com
EPH Controls UK
[email protected] www.ephcontrols.co.uk
Boiler
Plus
20190930_CP4M_OpIns_JW
CP4M Room Thermostat
Hardwired Open Therm®
CAUTION!
Before commencing, disconnect the
device from the mains. There are parts that
carry mains voltage behind the cover. Never
leave unsupervised when it is open. (Prevent
non specialists and especially children from
gaining access to it.)
Never remove this product from the electrical
baseplate. Disconnect from mains supply in the
event of any damage to any buttons. Do not
use sharp tools to push any button.
When the thermostat is in the AUTO mode, it will operate according to the
times and temperatures that have been programmed. The user can select
from 6 different programs per day - each with a time and a temperature.
There is no OFF time, only a higher and a lower temperature setpoint.
If the user wants the thermostat to be OFF at a certain time, set the
temperature for this time to be low. The thermostat will turn ON if the room
temperature is lower than the setpoint for the current period.
Example: If P1 is set to be 21˚C at 6am, and if P2 is set to be 10˚C at 8am, the
thermostat will look for the temperature to be 21˚C between 6am and 8am.
Press the button on the side of the thermostat.
‘
rst no
’ will appear on the screen.
Press the button.
‘
rst yes
’ will appear on the screen.
Press the ‘
OK
’ button to reset the thermostat.
RESET
AUTO
MAN
OFF
PROG
TIME
HOL
COPY
BOOST
OK
