REV. 07/2020
1
D
Truck transport
Place the truck on a wooden pallet.
NOTE
Only use haulage equipment with sufficient
load capacity.
The load weight is greater than the net
weight of the truck (including battery
weight).
The load weight does not just include the
net weight of the truck, it also includes the
wooden pallet.
The pallet or wooden box should be large
and strong enough to withstand the weight
of the truck.
Pay attention to the fork blades when lifting.
The truck onto the pallet, to prevent injuries
caused by the fork blades trailing on the
ground.
Follow the prescribed steps and park the
vehicle correctly.
Make sure the forks are aligned with
the pallet, move slowly and stop after
insertingthe forks as far into the pallet as
possible.
CAUTION
Operate on open, level ground and pay
attention to ground conditions when lifting
and lowering the palletto prevent the truck
from tipping.
When transporting the truck, make sure
it is fully secured and take precautionary
measures against bad weather.
Operating the truck without its own
drive system
This operating mode is not permitted when
negotiating
inclines and gradients.
If the truck has to be moved after a failure
has rendered it immobile, proceed as
follows:
Set the emergency stop switch “OFF”.
Set the key switch “OFF” and remove the
key.
1.1
•
•
•
•
•
i
D Transport and Commissioning
1.2
Fig1113-00019OM