23
•
Gradually accelerate the truck.
•
Travel at a constant speed.
• Always be prepared to brake. Only stop suddenly in dangerous situations.
• Reduce speed accordingly on narrow bends.
Placing loads
•
Drive the truck carefully up to the storage
location.
•
Lift the load handler until you reach the
desired lift height.
•
Remove the load to the goods shelves on
the load handler.
•
Lower the mast.
Put away and open the pallet
•
Rotate the pallet(1) to the vertical and
horizontal plane.
•
Put the pallet(1) into the shroud(2).
Opening the pallet is in the reverse order of
operations.
3.5 Parking the truck securely
When you leave the truck it must be securely parked even if you only intend to leave it
for a short time.
• Lower the load completely and position it
horizontally.
• Retract the mast support fully.
• Set the emergency brake switch (2)
“
OFF
”
.
• Turn off the key switch and remove the key(1).
Warning!
Do not park the truck on a slope. The
load must always be lowered to the
ground.
CAUTION!
Avoid placing the load down
suddenly to avoid damaging the load
and the load lifting device.
Содержание 508000003143
