48
Installation and Operating Instructions - SteamAttrac
EN Mounting
3.5
Commissioning
DANGER
Risk of electric shock
A faulty electrical connection poses the risk of an elec-
tric shock. This risk also applies following completion
of the installation work.
Electrical installation must only be carried out by a qualified and
licensed electrician.
Before working on the clamps for the connection terminal, all
current supply circuits must be switched off.
Work on the steam generator may be performed only if the
power supply has been disconnected.
The unit must be connected to the power supply according to
the circuit diagram and the terminal scheme.
Connecting control lines and the mains cable
1
Run the cable through cable feed opening in the base of the housing.
Cable feed opening
A
Control lines
B
Mains cable
A
A B
