SteamAttrac - Installation and Operating Instructions
15
Identification
Conversion table for units of water hardness
2.5
Description of the SteamAttrac steam generator
The SteamAttrac steam generator is an electrical device used to generate
steam for steam rooms and sauna cabins. The unit consists primarily of a
water tank with integrated heating elements (vaporiser tank), control elec-
tronics and various pipelines enclosed in a housing. The unit is a pressure-
free system. The vaporiser tank and housing are made of stainless steel.
The electronics are integrated into the unit. An external control system is
required to operate the unit. This can be purchased separately. The unit is
operated using cold water and requires a fixed water connection.
Generation of steam
Electricity is used to generate the steam. The heating elements heat the
water in the vaporiser tank and create steam. The steam is released into the
cabin using almost no pressure. Excess pressure in the vaporiser tank
builds up only if the steam pipe is blocked by condensation or objects in
the cabin.
11°–15° dH
Required
16°–20° dH
Mandatory
> 20° dH
Mandatory
°dH
°e
°f
ppm
mMol/l
German degree 1° dH =
1
1.2522
1.7848
17.848
0.17832
British degree
1 °e =
0.79862
1
1.4254
14.254
0.14241
French degree
1 °f =
0.56029
0.70157
1
10
0.1
Russian degree 1 °rH =
0.140
0.176
0.251
0.146
0.025
CaCO
3
(USA)
1 ppm = 0.056
0.07
0.1
1
0.01
mMol/l
1 mMol/
l =
5.6077
7.0218
10.009
100.09
1
Water hardness
Water softening system
