52
Installation and Operating Instructions - EOS Herkules XL S120
Commissioning
EN
5.5 Commissioning the vaporiser
(Herkules XL S120 Vapor only)
CAUTION
Risk of scalding from hot steam
Hot steam escapes while the vaporiser is in use.
Be aware of steam escaping from the vaporiser.
Using the steam function
1
Ensure that the shut-off valve at the potable water supply is open.
2
Switch on the vaporiser via the control unit.
3
Set the humidity level for the cabin by specifying the vaporiser humidity
via the control unit.
You will obtain either a humidity value that is regulated when the
sensor compares the actual to the target level or a value that is
defined by a timed cycle.
Note that the relative humidity level can vary greatly due to variable
temperature distribution in the cabin. The display on the hygrometer
and the display on the control unit can therefore differ.
NOTICE
Damage to the vaporiser from additives
The water in the vaporiser can build foam and boil over if additives
are added to it.
Never add essences, essential oils or herbs to the water in the
vaporiser; add them to the holder instead.
