38
Installation and Operating Instructions - EOS Herkules XL S120
Connections
EN
4 kW vaporiser output
Circuit diagram for 4 kW vaporiser
4.4 Establishing an electrical connection
The electrical lines should be connected prior to placing the heater in its
final location because the connection for the heating coil is located at the
rear of the heater. EOS Herkules XL S120 Vapor requires that the vaporiser
must also be connected electrically. The electrical connection for the
vaporiser is also located at the rear of the heater.
A
Signal
D
Connection for output controller
B
Heating element
E
Connection for sauna control unit
C
Thermostat
bl
max. 2 kW
max. 2 kW
bl
Wm
N
PE
Wb
N
L
V2
L
V1
4 kW
A
E
B
C
D
