EmoTouch 3 - Operating Instructions
85
Service settings
6.1.4 Reset function
You can perform a factory reset to restore the operating data or all of the
settings.
NOTICE
Resetting not possible
If a memory card has been connected prior to the reset, the saved
settings are automatically read into the system again. This means
the reset has no effect.
Remove the memory card before resetting the system.
See 6.2 Data transfer and updates,
Resetting the settings
1
Open the service settings.
See 6.1.1 Opening service settings,
2
Tap
and confirm the selection.
3
Select the setting and confirm.
Any customised settings that have been set will be lost.
a)
Cabin: Reset only the settings for the current cabin.
b)
All settings: All settings for all cabins are reset.
If you reset the settings, the control unit restarts and the cabin set-
tings must be reset. You can read in the old configuration again if you
have made a backup. See 6.2.1 Configuration backup,
3
K
Setting
Switch. hysteresis
09:16:42
27. June 2019
