EmoTouch 3 - Operating Instructions
37
Operation
Dimming the light
1
Press and hold the light image for 3 seconds.
Example: Single installation
The menu with the current setting appears.
2
Move the slider to the desired light intensity.
The lighting is immediately adjusted accordingly.
5.4.5 Retrieving temperature/humidity values
You can retrieve the current (actual) and set (target) temperature at all
times. This also applies to the humidity if humidity mode is on.
The displayed values correspond to the values measured directly by the
sensors. Due to the fact that, in a sauna, temperature zones vary greatly,
the values can differ significantly from what is shown on the thermometer/
hygrometer display on the wall.
01. June 2019
12:45:40
L
Setting
Light
01. June 2019
12:45:40
100%
