EmoTouch 3 - Operating Instructions
35
Operation
Without humidity sensor
:
The humidity is regulated in intervals.
This setting does not take into consideration the actual humidity in the
sauna cabin and makes it possible to consistently produce a specific vol-
ume of steam, if required.
Setting the humidity
1
Tap
in the status bar to switch to humidity mode.
2
Press and hold the sauna heater image for 3 seconds.
The sub-menu displays the values of the most recently saved
temperature and humidity.
3
Slide the humidity slider to the desired value:
a)
: With humidity sensor.
b)
: Without humidity sensor.
Example: With humidity sensor
The temperature value is automatically decreased if it is not in line
with the set humidity. See
Characteristic curve for temperature/humidity according to
The temperature is only decreased, never increased.
Example
Humidity setting = 40
The vaporiser is running a total of 40% of
the entire operating time.
%
°C
%
Setting
humidity
01. June 2019
temperature
40
12:45:40
60
