68
Installation Instructions - InfraStyle / InfraStyle i
Commissioning
EN
The home screen (standby) appears after the display has not been touched
for 15 seconds.
Settings that have not been saved are lost.
Date and time are saved if the built-in battery is in working order. All
other settings are saved permanently.
6.2 Configuring during commissioning or after a
reset
The basic settings must be defined to commission the unit. The program
guides you through the required steps.
The standby screen automatically appears after not using the control panel
for 15 seconds. Settings that have not been saved are lost.
Defining the basic settings
1
Select a language and confirm.
2
Set the time and confirm.
3
Set the date and confirm.
4
Select the type of use and confirm:
a)
Private use
b)
Commercial use
Special safety regulations apply to the commercial setting. See
1.3 Operator instruction,
This completes configuration of the IR cabin. The standby screen is
displayed once configuration is complete.
