23
GB
Dear customer
You have bought a high-quality technological
device which will give you years of pleasure.
This flake ice machine was designed and
tested in compliance with the current Europe-
an safety standards and was produced in the
manufacturer‘s factory in compliance with the
quality standard DIN EN ISO 9001:2008.
These assembly and operating instructions
have been drawn up for your information.
Please read the important information and the
information about the electrical connection
through carefully.
We wish you an exhilarating and refreshing
recreational experience.
Delivery scope
The following are included in the scope of
delivery:
1 flake ice machine
1 hose set
1 Reduction
1 Stainless steel tube
1 set of installation and operating instructions
Models with a floor outlet:
1 HT pipe 75 (1m)
1 elbow 45°
1 Armaflex hose (1m)
General information
Check first that the flake ice machine is unda-
maged on delivery. Please reclaim transport
damages immediately with the forwarding
company or contact the company who sup-
plied you with the device.
The flake ice machine is designed for installati-
on in rooms with room temperatures between
10 °C and 40 °C. If the machine is operated for
longer periods outside this temperature range,
this is deemed as incorrect handling and will
invalidate the warranty.
Optimum ice preparation can only be guaran-
teed, if the input temperature of the con-
nected water supply lies below 30 °C.
The water circuit must be disinfected on a regu-
lar basis so that no germs or bacteria can collect
in it. You can set the time and frequency of the
disinfection process via the operating display..
E-Cool Wall B
E-Cool Wall S
Appropriate use
The intended purpose of this flake ice machine
is the continuous production of flake ice. The
filling level of the collection tray is monitored
by a sensor. The time during which the flake
ice machine produces ice can be set via a
programmable operating display.
Compliance with the standard operation,
maintenance and repair conditions is also an
element of appropriate use.
The manufacturer cannot be held liable for
deviating, unauthorized alterations and any re-
sulting damages: the initiator of these changes
bears the full risk.
