www.enware.com.au
Call 1300 369 273 11
4x 12Gx50mm
Screws
(Drill pilot holes
on bracket with
3 mm drill)
Installing the Pan:
8. WC pan should be bedded with silicone sealant.
Ensure the floor surface and bottom surface of
pan are clean and dry, free of dust, moisture and
grease
Apply silicone sealant to the entire bottom
contact surface of pan and around the perimeter
to achieve good adhesion and to create a strong
bonding between the pan and the floor.
9. Install pan into position.
10. Through the pan fixing holes, pre-drill the bracket
using a 3mm drill bit.
11. Fix the pan in place using four 12G x 50mm
screws supplied. Hand tighten the screws, but
do not over-tighten. (Over-tightening screws will
cause the ceramic to crack.)
12. Attach white screw caps (supplied) onto the
heads of fixing screws.
