User Guide for En2 MX receiver
Installing and removing batteries
To open the battery vault, slide the grip to the left. This will unlock it and the battery
can be placed inside with the positive end of it pointing towards the vault flap.
To close the battery vault, simply push gently down on the
flap until you hear a clicking sound. The receiver is now
locked and ready to use.
Switching the receiver On and Off
To turn the receiver on, simply slide the switch to the left. To turn it off, slide the
switch to the right.
Viewing the Main Menu
On the top edge of the receiver, press and hold the navigation switch for 2 seconds.
The main menu will be displayed and will read from left to right:
EXIT> FREQUENCY>AF OUTPUT> OPTIONS> SCAN> INFO>LOCK.
Accessing the Frequency option
After accessing the main menu, use the wheel to scroll to the Frequency option. Once
the frequency option is highlighted press the middle part of the wheel to view a range
of frequencies.
A range of frequencies will then be displayed. The desired frequency can be accessed
by using the wheel to scroll to it. Then press the middle part of the wheel to select it.
Once a frequency has been selected, the receiver instantly goes back to the main menu.
AF output option
Slide grip to the right to
open the battery
compartment.
Switch.
