046-07-GA_Oxi_B-a_eng 7
4.
Start-up
Connecting the oxygen sensor
Connect the sensor (2) to the jack plug on the device cable and fix with the connecting
nut on the jack plug
Switch on the OxiQuant B and check whether a measurement value is displayed
After successful calibration, the device is ready to take measurements (-> see point 5/
Calibration and measurement accuracy)
To adapt it to a gas supply system, the sensor (1) is connected to the flow diverter (3)
and inserted into the T-piece (4) (optionally available).
1
2
3
4