Technical Specs
External dimensions:
14.33 x 15.9 x 12.55 in (364 x 404 x 319 mm)
Curing chamber dimensions:
7.87 x 7.87 x 7.48in (200 x 200x190mm)
Emitter type and quantity:
60 Hi-power LED 5 W
Irradiance system:
OmniRay 360° Irradiance
Wavelengths:
365 nm - 405 nm
Emission opening:
+/- 20 nm
Total emitter power:
150 W
System:
Eco-passive
Heating control:
6x PID controller
Management:
16 bit IDM processor
Interface:
3.2 in TFT touch screen
Programs:
2 standard - customer set n°7 memory
Command:
Auto off
Connectivity:
2.4 Ghz WIFI
Power supply:
Internal
Power supply voltage:
110-230V 6-4A 50-60Hz
Environmental Conditions
Situate the PCA 4000 in a ventilated area away from sources of heat
and away from flammable materials and liquids that may cause a
safety risk - see
Safety Instructions
p. 4
.
Keep the PCA 4000 at least 8 inches / 20 cm from the wall. To avoid
damaging the apparatus, do not obstruct in any way the cooling
ducts, their openings to the outside, the fans on the rear panel,
and fan on the base of the PCA 4000. Keep the PCA 4000 in an
environment with temperatures within 65° to 82° F / 18° to 28° C.
Recommended Custom Curing Times
Below is a list of recommended curing times for EnvisionTEC materials
in the PCA 4000 curing apparatus. Curing times are subject to change.
Material
Time (H:MM:SS) Temp. Power
Easy Cast 2.0
0:30:00
60˚ C
100%
EC-3000
0:10:00
60˚ C
100%
EC-500
0:30:00
60˚ C
100%
E-3172
First cycle:
0:06:00
60˚ C
100%
Second cycle:
0:30:00
60˚ C
100%
E-3172
0:01:00
60˚ C
39%
E-3843
First cycle:
0:06:00
60˚ C
100%
Second cycle:
0:30:00
60˚ C
100%
E-3860
First cycle:
0:06:00
60˚ C
68%
Second cycle:
0:30:00 160˚ C
100%
E-5015
0:20:00
60˚ C
100%
E-AquaModel
0:02:00
20˚ C
100%
E-Guard 2.0
0:01:00
20˚ C
35%
E-Guide 2.0
0:01:00
20˚ C
35%
E-IND147
First cycle:
1:30:00
60˚ C
68%
Second cycle:
3:00:00 170˚ C
100%
E-IND402
1:30:00
60˚ C
100%
(Black, Gray)
E-IND406
First cycle:
1:00:00
60˚ C
100%
Second cycle:
2:00:00 140˚ C
100%
E-Model
0:01:00
20˚ C
100%
(Light, Beige, HS)
E-Orthoshape
0:01:00
20˚ C
100%
E-Partial
0:04:00
20˚ C
100%
E-Rigid Form
0:04:00
20˚ C
100%
(Charcoal, Amber)
E-Rigid PU
0:05:00
60˚ C
100%
NextDent Gingiva Mask
0:02:00
20˚ C
100%
The PCA 4000 Parts Curing Apparatus is the ideal solution for
post-curing parts that have been 3D printed using cDLM or DLP
technologies. The PCA 4000 utilizes a unique system of UV LED
light sources that use both 365 nm to deep cure and 405 nm for the
perfect surface cure of each part. It has a microprocessor-controlled
touchscreen interface and intuitive software that allows you to control
every aspect of the post-processing 3D printed models. With 360°
irradiation and controlled heating, the PCA 4000 can optimize your
productivity.
Applicable Printers:
All cDLM and DLP printer series
© EnvisionTEC Page 1 of 4
Technical Guide
PCA 4000
TS-OPI-PCA-4000-V20210311-FN-EN.pdf
00:00
Connected
Set
Program
CLEAR
BASIC
CUSTOM
CUSTOM
BASIC
CLEAR
START
Set
Timer
00:02:00
START
Set
Temp
20 °C
START
Set
Power
100%
Program 0
Power
Temp
Time
START
100%
20 °C
00:02:00
Set PRG
Prog: 0
Prog: 0
Prog: 1
Prog: 2
Prog: 3
Prog: 4
Prog: 5
Prog: 5
100%
100%
100%
100%
100%
100%
100%
30°C
30°C
30°C
30°C
30°C
30°C
30°C
00:10:00
00:10:00
00:10:00
00:10:00
00:10:00
00:10:00
00:10:00
Set PRG
Curing
chamber lid
Touch
screen
Cooling
ducts
Fan output
(not pictured)
PCA 4000 FRONT VIEW
Fig. 1
PCA 4000 CURING CHAMBER
Fig. 2
Curing chamber lid
Curing chamber
LED light source
Touch
screen
Cooling
ducts
Cooling
ducts