Envision One cDLM страница 64 Скачать руководство пользователя

Страница: 64 / 73

Envision One cDLM® User Manual

www.envisiontec.com

TS-MAM-EnvisionOneCDLMUserManual-V5.0-FN-EN , 2021-12-15

Page 64 of 73

Service and Maintenance

WARNING!

Risk of injury!

Risk of injury from crushing caused by automatically moving printer parts.

Body parts may be crushed by movements of the build platform.

•

The printer may only be operated if the protecting devices are working properly.

WARNING!

Risk of injury!

Risk of slipping, stumbling or falling of persons through loose cables, objects or liquids on the floor.

•

Keep the printer area clean and dry.

•

Make sure that no loose cables or objects are lying on the floor of the printer area.

•

Place all printer cables carefully to prevent trip hazard.

•

After repairing the printer, place cables back carefully to prevent trip hazard.

•

Remove tools and other objects from the printer.

•

Inform the personnel of residual risks.

CAUTION!

Risk of injury!

Residual risks caused by the ergonomics of the printer.

•

Maintain a healthy posture.

•

Instruct the personnel accordingly.

The following sections contain information on service and maintenance of the printer. A regular maintenance

according to the maintenance plan is an essential precondition for an efficient use of the printer.

•

Section

Operational Maintenance

describes the operational maintenance and how to carry out the

maintenance tasks.

•

Section

Auxiliary Materials and Consumables

gives an overview of all auxiliary materials and

consumables.

12.1

Customer Service

EnvisionTEC GmbH
Brüsseler Str. 51
D-45968 Gladbeck
Germany
Phone: 49 2043 9875-0 (This phone number is

available only during office hours).
E-mail: [email protected]

EnvisionTEC Inc
Dearborn, MI
USA
Phone: 1-313-436-4300
Create a support ticket:

https://envisiontec.com/support/

12.2

Operational Maintenance

IMPORTANT

Carry out the maintenance tasks according to the table below and the intervals specified therein.

NOTICE

The execution of maintenance activities, including date and performing operator, shall be documented

due to traceability.

The operational maintenance helps ensuring a smooth and efficient production process. The operating personnel

can carry out these tasks after being trained accordingly.

Содержание cDLM










































































Результаты поиска

Содержание cDLM

Отзывы:

Похожие инструкции для cDLM

Бренды по названию

Популярные бренды

Envision One cDLM, Инструкция по эксплуатации

Результаты поиска

Содержание cDLM

Отзывы:

Похожие инструкции для cDLM

Бренды по названию

Популярные бренды