Envision One cDLM® User Manual
TS-MAM-EnvisionOneCDLMUserManual-V5.0-FN-EN , 2021-12-15
Page 30 of 73
8
Software Presentation
Envision One Control Software
In the
Control Software
,
there are two main menus:
Settings
Menu
and
Job List
Menu.
Settings Menu
The
Settings
Menu:
•
allows the user to change settings of the printer build parameter or the printer itself,
•
gives further information about the printer or the LAN connection,
•
allows the user to switch the printer off electronically.
To exit the Settings Menu, tap the icon on the left part of the screen.
To enter the main screen, tap the
icon on top-left corner of the screen.
8.1
Wi-Fi Tab
The Wi-Fi tab allows for setting the Wi-Fi connection on the printer.
Tap
Settings | Wi-Fi
to open the tab.
For detailed information, see the section
WI-FI Set on the printer
.
8.2
Material Info Tab
The
Material Info
tab provides information about:
•
the type of material used on the printer;
•
the amount of the material left on the material tag.
Tap
Settings | Information | Material I
nfo
to open the tab.