Envision One cDLM Скачать руководство пользователя страница 18

Страница: 18 / 73

Envision One cDLM® User Manual

www.envisiontec.com

TS-MAM-EnvisionOneCDLMUserManual-V5.0-FN-EN , 2021-12-15

Page 18 of 73

5.3

Positioning the Printer

IMPORTANT

Risk of damage to the printer!

Incorrect positioning of the printer can cause damage to the printer and and/or to the built parts.

Please, follow the guidelines!

The Envision One needs to be installed on a sturdy surface that can comfortably hold over 75 pounds (34 kg). The

printer requires a minimum amount of space for operation, maintenance, and heat dissipation.

•

A minimum of 18 inches (46 cm) behind the printer

•

A minimum of 24 inches (61 cm) on the left and right side of the printer

•

A minimum of 48 inches (122 cm) above the table-top

The printer requires an oxygen concentrator in order to print. The concentrator weighs 11.9 lb (5.4 kg) and is made

to sit on the floor near the printer. The concentrator connects to the printer via a 6-foot long tube and as such, the

concentrator must be within 6 feet (183 cm) of the printer to allow room for slack.

Place the oxygen concentrator so that there is at least

12″

(30 cm) of space between the concentrator and any

walls, curtains, or other obstructions.

IMPORTANT

Leave a space for oxygen concentrator!

The concentrator dimensions are 12.2” (31cm)

6.5”(16.5 cm)

12.2”(31cm)

Содержание cDLM










































































Результаты поиска

Содержание cDLM

Отзывы:

Envision One cDLM, Инструкция по эксплуатации, Страница: 18 / 73

Результаты поиска

Содержание cDLM

Отзывы: