Envira IOT Nanoenvi IAQ, Руководство пользователя, Страница: 9 / 35

Nanoenvi IAQ WiFi 1.3.1 User Manual
Capítulo 3. Safety instructions Pág. 4
Capítulo 3. Safety instructions
Nanoenvi IAQ ™ ™ has been designed to be installed in a safe indoor space in order to monitor the air quality continuously.
All use for any other purpose will be considered as incorrect.
Nanoenvi IAQ
™
has been manufactured in accordance with the latest regulations on safety and reliability in technology and
its operation. It has been tested and distributed from the factory, technologically safe and completely reliable. However, there
can always be a residual risk. Read and follow the safety instructions carefully to prevent these risks and use them correctly.
Envira Sostenible S.A. cannot accept any liability for non-compliance with the safety and use instructions.
Before installing and / or using the device make sure you have read and understood this manua
3.1. Safety instructions
The device must be handled under the indications specified in this manual and the following risks and indications must be
considered:
• Never use the equipment with faulty or damaged cables.
• Improper use or opening of your Nanoenvi IAQ
™
can cause electric shock, fire, flames and other related
problems.
• Do not use the Nanoenvi IAQ
™
near liquids and especially don’t submerge it in them.
• Do not open the covers of the equipment or remove their fasteners.
• Do not use the equipment if it shows damage that could pose a risk.
• Do not make unauthorized modifications or repairs to the equipment, its components or accessories.
• Keep the equipment away from water and its surroundings.
• Nanoenvi IAQ
™
is not designed to be handled by children under 14 years of age.
• Do not use Nanoenvi IAQ ™ near water, fire, or in extreme heat conditions.
Extreme levels of humidity and contamination can damage this equipment.
Protect the equipment from moisture, dirt, and shock during transportation, storage, and operations To avoid
damage to the equipment, follow the instructions below:
• Do not cover all or part of your Nanoenvi IAQ
™
.
• Use Nanoenvi IAQ
™
as indicated in this manual.
• Do not use Nanoenvi IAQ
™
if it has been damaged or you think it is not working properly.
• Do not install or place Nanoenvi IAQ
™
on surfaces exposed to heat.
• Do not attempt to open the case and make modifications to the Nanoenvi IAQ ™ .
• Do not use Nanoenvi IAQ ™ for uses other than those specified in this manual.