Envira IOT Nanoenvi IAQ, Руководство пользователя, Страница: 32 / 35

Nanoenvi IAQ WiFi 1.3.1 User Manual
Apéndice B. Nanoenvi IAQ Status lights Pág. 27
Apéndice B. Nanoenvi IAQ Status lights
B.1. Lights codes
Tabla B.1. Relationship between LED indicator and device status
Indicador LED Estado del
dispositivo
Descripción
LED1 LED3 LED2
LED1 LED3 LED2
CIAN CIAN CIAN
O FF
O FF
O FF
Initializing When the LED lights blink cyan in an alternative
way, Nanoenvi IAQ is starting or configuring.
LED1 LED3 LED2
CIAN CIAN CIAN Configuration
in progress
When the LED lights are lit steady cyan (not blinking),
Nanoenvi IAQ is in configuration mode The device
creates a WiFi access point with SSID 'NanoenviIAQ'
and allows access to the configuration web.
LED1 LED3 LED2
AZ UL AZ UL AZ UL
Connected
to broker and
measuring: quality
of air is excellent
When the LED lights are blue, the device is taking
measurements of the different parameters, it’s sending the
data to the MQTT broker and the air quality index selected
in the configuration (either IAQI, TCI or EIAQI) is ‘excellent’.
LED1 LED3 LED2
VERDE VERDE
VERDE Connected
to broker and
measuring: quality
of air is good
When the LED lights are green, the device is making
measurements of the different parameters, it’s sending the
data to the MQTT broker and the air quality index selected
in the configuration (either IAQI, TCI or EIAQI) is' good '.
LED1 LED3 LED2
AM ARILLO AM ARILLO AM ARILLO
Connected
to broker and
measuring: quality
of air is medium
When the LED lights are yellow, the device is making
measurements of the different parameters, it's sending the
data to the MQTT broker and the air quality index selected
in the configuration (either IAQI, TCI or EIAQI) is 'medium'.
LED1 LED3 LED2
RO J O RO J O RO J O Connected
to broker and
measuring: quality
of air is bad
When the LED lights are red, the device is making
measurements of the different parameters, it's sending the
data to the MQTT broker and the air quality index selected
in the configuration (either IAQI, TCI or EIAQI) is' bad '.
LED1 LED3 LED2
LED1 LED3 LED2
AM ARILLO O FF O FF
O FF O FF
LED1 LED3 LED2
O FF
O FF
AM ARILLO
AM ARILLO
OTA update
in progress
When one of the 3 LEDs is lit yellow, that indicates the
download progress of an OTA update. If LED 1 is on, the device
is downloading 1/3 of the update, if LED 2 is on, the second
third of the OTA update is being downloaded, and if LED 3
is on, the last third of the OTA update is being downloaded.
LED1 LED3 LED2
RO J O
O FF
O FF
WiFi configuration
error
After configuring the WiFi network, if LED 2 is lit red (while
LED 1 and LED 3 are off), it indicates that the device
cannot connect to the WiFi network because it hasn't been
configured correctly (will need to be configured again).