Pixel Triton User Manual
Part No.: 51322
For latest version visit:
www.enttec.com
25 October 2018
mfile ID: 4815381
Page|
2
Software Features
•
Web configurable
•
Firmware updateable
•
Supports the following DMX over Ethernet
protocols:
o
Art-Net
o
Streaming ACN (sACN)
•
Configurable Static or Dynamic (DHCP) IP
(DHCP by default).
•
Netmask and gateway updateable
•
Supports up to 8 ethernet universes
(maximum of 4 universes per output port)
•
Configurable pixel ordering.
•
Monitors and maintains device temperature
•
Monitors and displays the power consumed
by each output
•
Detects and indicates when the power
consumed by an output is on or above the
recommended value
•
Monitors and displays the network traffic
for the DMX over ethernet protocol enabled:
o
Data packets received and sent
o
Last IP data received from
o
Poll packets received
•
Easily extendable network – daisy chain
ethernet connection
•
Web faders for instant testing of setup
LED Status
Pixel Triton has 8 LED indicators:
•
Power LED
•
Device Activity LED
•
Link and activity LED (each ethernet port)
•
Output limit indicator for each output
Power
•
This LED is red in colour
•
Indicates that the internal power supply is
working, and the unit is ready to operate
•
If the LED is off after the mains cable is
connected to a working wall outlet, it means
that there is a problem in the unit.
Activity LED
•
This LED indicates the status of Pixel Triton
and should be constantly flashing.
Operating status of the LED is as follows:
Link 1 and Link 2
Each LED indicates a connection has been
established using the corresponding ethernet port
Activity 1 and Activity 2
Shows transmit and receive activity of each
ethernet port
Output 1/2 limited
Indicates if the load, connected to the
corresponding output port, is consuming or above
the recommended operational power value
LED rate
Status
0.5Hz
Device functions normally
Always
on
2 or more different IPs sending ethernet
data to the same output universe
