OCTO MK2 (71521)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
7
|
ID: 5928937
Document Updated: Jan 2022
Functional features
The OCTO supports the following input protocols:
□
Art-Net
□
Streaming ACN (sACN)
□
KiNET
□
ESP
The OCTO is compatible with synchronous and asynchronous pixel protocols. For the latest list please
www.enttec.com/support/supported-led-pixel-protocols/
RGB, RGBW and White Pixel Order support
User-friendly interface to create and execute live effects on the fly.
Save effects to play from power up.
Maximum output refresh rate is 46 frames per second.
Hardware features
Electrically insulated ABS plastic housing.
Forward facing LED status indicator.
Identify / Reset button.
Pluggable terminal blocks.
Link & Activity LED indicator built into each RJ45 port.
Easily extendable network – daisy chain up to 8 units if the output is in direct mode to ensure sync
between pixels. If using in Standalone mode, a maximum of 50 devices can be linked per chain.
Surface mount or TS35 DIN mount (using provided DIN Clip accessory).
Flexible wiring configuration.
35mm DIN rail accessory (included in packaging).
LED status indicator
The LED status indicator can be used to determine the OCTO’s current state. Each state is as follows:
LED Color
OCTO Status
White (static)
Idle
Flashing Green
Direct mode data receiving
Black over White Standalone mode
Red over Green
Multiple merge sources
Purple
IP conflict
Red
Device in boot / error
