DMXPlayBack MK2 User Manual
8
Getting to know your DMXPlayBack MK2
Thank you for purchasing the DMXPlayBack MK2. At Enttec we are
proud of our products and we hope you will enjoy using them as much
as we enjoy designing and building them.
The DMXPlayBack MK2 is a DMX512 recording and playback tool
that captures snapshots of the lighting scenes produced by a control
system. The DMXPlayBack then plays the captured scenes back in any
desired sequence or combination, with selected scene fade in/out times
and pauses between each scene.
The accompanying ShowEditor software controls and configures the
DMXPlayback. It can be used to modify the recorded scenes or to build
entire new lighting scenes. In addition to setting up and loading show
sequences, ShowEditor can configure DMXPlayback for either remote
control or stand-alone operation.
ShowEditor allows you to store a library of shows in a database on
your computer or on removable media. These can be loaded into the
DMXPlayBack unit and played when required.
Features
The DMXPlayBack MK2 provides:
•
Full 512 channel universe of input and output
•
Scene capture from the DMX512 input
•
Up to 12 Shows
•
Up to 65,535 Scenes
•
Up to 65,535 Scenes per Show
•
Fade times and delay times (0 to 100 minutes in 0.1sec steps)
•
DMX512 data compression to optimise memory usage
•
Data stored indefinitely in non-volatile flash memory
•
Show replay can be triggered on:
power up
DMXPlayBackRemote
external switch closure
remote serial command
