Setting up DMXPlayBack
DMX Startup frame
On Startup the DMXPlayBack continuously outputs a specific Startup
Scene, unless it is configured to automatically run a Show.
To set the Startup Scene:
Select the required Scene from either the
Show
or
Scene
Database
window for display in the
DMX Output
window.
Modify the Scene, if necessary, by selecting the channels in the
DMX Output
window to set new levels.
Select
DMXPlayBack MK2
then
Set Startup frame
, from
the main ShowEditor menu.
The current contents of the
DMX Output
window are copied to the
Startup frame of the DMXPlayBack. The status of the transfer is
indicated by a progress bar that will appear in the bottom of the Status
window.
Show Replay Options
DMXPlayBack can be configured to play a specific Show
automatically whenever it is powered up. It can also be set up to play
back a specific Show every time an external switch is closed.
DMXPlayBack MK2 User Manual
38
