Adding Scenes to a Show
Scenes are added to a Show by clicking on them in the
Scene
DataBase
window, then dragging them into the
Show
window and
dropping them on the required point in the Show sequence. The levels
in the Scene will be shown in the
DMX Output
window and
transmitted by the DMXPlayBack.
Any Scene may be added to a Show any number of times.
A Show may contain up to 65,535 Scenes.
Setting Fade and Delay times
Delay and Fade times are set by selecting a Scene in the
Show
window, then entering the required times into the
Fade In
and
Delay
boxes. Times may be any duration from 0 seconds to 6000 seconds
(100 minutes) in steps of 0.1 seconds. Longer Delay (or Fade) times
can be achieved through repetitions of a Scene.
Show Options
The
Show Options
window defines how the DMXPlayBack handles
replaying a Show.
Show run times
The number entered in the
Show run times
box sets the number of
times the Show will be repeated each time it is triggered. The value
entered may be any number between zero and 255. An entry of zero
will cause the show to repeat continuously.
DMXPlayBack MK2 User Manual
16
