◦
If
nShield CSPs (CAPI, CNG)
was selected:
64bit CSP install wizard
, which sets
up CSPs for 64-bit applications
◦
If
nShield CSPs (CAPI, CNG)
was selected:
CNG configuration wizard
, which
sets up the CNG providers
◦
If the
nShield Java
package was selected:
KeySafe
, which runs the key
management application
◦
If
nShield Remote Administration Client Tools
was selected:
Remote
Administration Client
, which runs the remote administration client
If selected, the SNMP agent will be installed, but will not be added to the
Services
area in
Control Panel > Administrative Tools
of the target Windows
machine. If you wish to install the SNMP agent as a service, please consult the
SNMP monitoring agent
section in the
User Guide
.
Do not run any CSP installation wizard before installing the module
hardware.
6. Click
Finish
to complete the installation.
7. The following global variables are set upon install:
◦
%NFAST_CERTDIR%
◦
%NFAST_HOME%
◦
%NFAST_KMDATA%
◦
%NFAST_LOGDIR%
You may additionally need to do the following after you have installed the software:
• In the
Windows Device Manager > Security Accelerator
, select the appropriate
module.
• Under
Properties > Power Management
, deselect
Allow the computer to turn off
this device to save power
.
7.2. Installing the Security World Software on Linux
In the following instructions,
disc-name
is the name of the mount point
of the installation media.
1. Log in as a user with root privileges.
2. Place the installation media in the optical disc drive, and mount the drive.
3. Open a terminal window, and change to the root directory.
4. Extract the required
.tar
files to install all the software bundles by running
commands of the form:
nShield® Solo and nShield® Solo XC Installation Guide
21 of 49
