Apartment Station Configuration
19
Provision
10.4.1
Configure Flat Number and SIP Server Settings
i.
Navigate to the
User Config
tab.
ii.
Enter the
Flat No.
a.
Systems
WITHOUT
an Entrotec Connect Server, enter the desired
Flat No.
e.g. 23
b.
Systems
WITH
an Entrotec Connect Server, enter the desired
Flat No. followed by #0
e.g. 23#0.
NOTE
The #0 parameter identifies the apartment station as the Master within the same property. Any
additional Slaves must be identified (e.g. 23#1 for slave 1, 23#2 for slave 2).
FIGURE 10-6
iii.
Press
OK
to save.
iv.
Navigate to the
SIP Server
tab.
FIGURE 10-7
v.
Enter the following SIP Details:
a.
Systems
WITHOUT
EC Server;
Server IP
Main Call Panel IP,
Network Port
5060.
b.
Systems
WITH
an EC Server;
Server IP
Entrotec Connect Server IP,
Network Port
5080.
NOTE
DO NOT adjust Register Pwd
vi.
Optional - enter the
Domain
VDP, SIP Server
User Name
and
Login Pwd
.
vii.
Press
OK
to save.
Содержание PRO-DPC
Страница 1: ...PRO DPC Installation and Setup Guide with PRO AS7 Issue 003 ...
Страница 26: ...Notes 26 ...
Страница 27: ...Notes 27 ...
