Entrematic EM EMSW, Руководство пользователя и инструкции по эксплуатации

Страница: 5 / 14

Service
Inspections should be done regularly by a trained and qualified person. The frequency of these in-
spections should be according to national regulations (or according to industry standard if there
are no national regulations). This is especially important when the installation concerns a fire-ap-
proved door or a door with an emergency-opening function. To extend the life of your investment
and ensure safe and reliable operation of the door, we recommend a minimum of 2 visits per year
or more, depending on usage and operating conditions. Environmental aspects shall also be con-
sidered.
Talk to your Entrematic Group representative to learn more about our service offering.
Intended use
The EM EMSW is an automatic swing door operator developed to facilitate entrances to buildings
and within buildings. The EM EMSW is an electrohydraulic operator approved for fire door applications.
It is to be installed indoors where it is suitable for almost all types of external and internal swing
doors. This widely-used operator can be found on applications ranging from handicapped-access
in private homes to high-traffic retail operations.
The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The
system is self-adjusting to the effects caused by normal variations in the weather conditions and to
minor friction changes caused by e.g. dust and dirt.
For escape in emergency situations the doorset is opened manually.
For installation and maintenance see Installation and Service manual 1004291.
Save these instructions for future reference.
Technical specification
Entrematic Group AB Manufacturer:
Lodjursgatan 10, SE-261 44 Landskrona, Sweden Address:
EM EMSW Type:
230 V AC +/-10%, 10 A, 50 Hz Mains power supply:
Max. 230 W (Max. 460 W Double door set) Power consumption:
IP20 Degree of protection:
Sound pressure:
Third party approvals from established certification organizations valid
for safety in use, see Declaration of Conformity. Approvals:
5 Issue 2019-06-11 1004131-EMen-12.0