28
IP2159EN - 2017-06-12
12. Starting up the door
Close the door by rotating the SPTE trimmer to 0°.
Place the door in the closed position.
Rotate the SPTE trimmer on the control panel to 0° (if it is not already in this position).
Turn on the power supply.
Gradually rotating the SPTE trimmer clockwise, the door opens electrically. Slowly bring it to the required open position, plus about
15 mm.
0°
SPTE
0°
SPTE
Loosen the door stop [A]. Move it to the unknurled part of the arm.
Insert the door stop [A] in the groove, as close as possible to the opening limit switch [B].
If necessary, make a fine adjustment with the screw [C] on the opening limit switch.
A
A
A
C
B
0°
SPTE
A
C
B
