EntraPass MorphoAccess SIGMA Lite Series, Руководство по установке

Страница: 53 / 74

Configuration procedures are described inside the MorphoAccess® SIGMA Lite Series
Administration Guide as follows:

Section 4: Terminal Configuration And Administration
MorphoAccess® SIGMA Lite Series native mode
MorphoAccess® SIGMA Lite Series terminal is by default configured in native mode,
also named MA5G. It will support the new features and configurations only in the
native mode. The terminal can be configured using an internet browser connected to
the embedded Webserver application.
NOTA : When terminal mode is switched from MA5G to any of the legacy modes, the entire
configuration (excepted communication links) and all databases are erased
NOTA : The terminal is rebooted on mode change and factory settings are applicable.
Once the product is configured in native mode, the following methods can be used to
configure the terminal:

through the Ethernet interface (remote management)

through a Wi-Fi™ connection (license and dongle required)
Configuration procedures are described inside the MorphoAccess® SIGMA Lite Series
Administration Guide as follows:

Section 4: Terminal Configuration And Administration
www.TURNSTILES.us / www.entrapass.com / 8641 S. Warhawk Road, Conifer, CO 80433 / 303-670-1099