27
Parity Bıt:
The parity bit can be set to none, odd or even. The value of this parameter
must be same as the value in the software you use to communicate with the product.
Otherwise, you cannot communicate with the product.
3.1.5 Alarms Menu
Alarms menu is where alarms are programmed.Step alarm, step warning values are
entered as a % value. Individual alarm values can be set, Voltage, THD-I, THDV,
Temperature and User Alarm. Moreover, the user can define a user-specific alarm
parameter under the alarm settings, and assign alarm features for the said parameter.
The product has 1 alarm relay output, except for step relays. If one of the alarm-
triggering situations given above occurs, the relevant error symbol will be displayed on
the screen.
3.1.5.1 Alarm Delay Time
If you snooze an alarm that alarm will not be notified with the
delay of time which you have entered. But in that time the notification LED continues to
warn if the alarm is still active, you can see the alarms under message menu. All of the
alarm’s notification time starts when you press ok under notification screen.
3.1.5 Alarms
Menu
3.1.5.1
Alarm De-
lay Time