Enterasys SecureStack C2, Руководство по настройке, Страница: 200 / 607

set snmp group
6-12 SNMP Configuration
set snmp group
Use this command to create an SNMP group. This associates SNMPv3 users to a group that shares
common access privileges.
Syntax
set snmp group groupname user user security-model { v1 | v2c | usm } [ volatile |
nonvolatile ]
Parameters
Defaults
If storage type is not specified, nonvolatile storage will be applied.
Mode
Switch command, read ‐ write.
Example
This example shows how to create an SNMP group called “anyone”, assign a user named “public”
and assign SNMPv3 security to the group:
C2(su)->set snmp group anyone user public security-model usm
clear snmp group
Use this command to clear SNMP group settings globally or for a specific SNMP group and user.
Syntax
clear snmp group groupname user [ security-model { v1 | v2c | usm }]
Parameters
Defaults
If not specified, settings related to all security models will be cleared.
Mode
Switch command, read ‐ write.
groupname Specifies an SNMP group name to create.
user user Specifies an SNMPv3 user name to assign to the group.
security ‐ model v1 |
v2c | usm
Specifies an SNMP security model to assign to the group.
volatile |
nonvolatile
(Optional) Specifies a storage type for SNMP entries associated with the
group.
groupname Specifies the SNMP group to be cleared.
user Specifies the SNMP user to be cleared.
security ‐ model v1 |
v2c | usm
(Optional) Clears the settings associated with a specific security model.