Enterasys SecureStack C2, Руководство по настройке, Страница: 167 / 607

set port broadcast
SecureStack C2 Configuration Guide 5-29
ge.1.1 0 50
ge.1.2 0 50
ge.1.3 0 40
ge.1.4 0 14881
set port broadcast
Use this command to set the broadcast suppression threshold, in packets per second, on one or
more ports. This sets a threshold on the broadcast traffic that is received and switched out to other
ports.
Syntax
set port broadcast port-string threshold-val
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example configures ports 1 through 5 with a broadcast limit of 50 pps:
C2(su)->set port broadcast ge.1.1-5 50
clear port broadcast
Use this command to clear the broadcast threshold limit to the default value of 14881 for the
selected port.
Syntax
clear port broadcast port-string threshold
Parameters
Defaults
None.
port ‐ string Select the ports for which to configure broadcast suppression thresholds.
For a detailed description of possible port ‐ string values, refer to “ Port
String Syntax Used in the CLI ” on page 5 ‐ 2.
threshold ‐ val Sets the packets per second threshold on broadcast traffic. Maximum
value is 148810 for Fast Ethernet ports and 1488100 for Gigabit ports.
port ‐ string Select the ports for which to clear broadcast suppression thresholds. For a
detailed description of possible port ‐ string values, refer to “ Port String
Syntax Used in the CLI ” on page 5 ‐ 2.