Enterasys SecureStack C2, Руководство по настройке, Страница: 163 / 607

set linkflap action
SecureStack C2 Configuration Guide 5-25
set linkflap action
Use this command to set reactions to a link flap violation.
Syntax
set linkflap action port-string { disableInterface | gensyslogentry | gentrap |
all }
Parameters
Defaults
None.
Mode
Switch mode, read ‐ write.
Example
This example shows how to set the link flap violation action on port
ge
.1.4 to generating a Syslog
entry.
C2(rw)->set linkflap action ge.1.4 gensyslogentry
clear linkflap action
Use this command to clear reactions to a link flap violation.
Syntax
clear linkflap action [ port-string ] { disableInterface | gensyslogentry | gentrap
| all }
Parameters
Defaults
If port ‐ string is not specified, actions will be cleared on all ports.
Mode
Switch mode, read ‐ write.
port ‐ string Specifies the port(s) on which to set the link flap action.
disableInterface Sets the reaction as disabling the interface.
gensyslogentry Sets the reaction as generating a syslog entry.
gentrap Sets the reaction as generating an SNMP trap.
all Sets the reaction as all of the above.
port ‐ string (Optional) Specifies the port(s) on which to clear the link flap action.
disableInterface Clears the reaction as disabling the interface.
gensyslogentry Clears the reaction as generating a syslog entry.
gentrap Clears the reaction as generating an SNMP trap.
all Clears the reaction as all of the above.