Enterasys SecureStack C2, Руководство по настройке, Страница: 146 / 607

show port alias
5-8 Port Configuration
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to enable
ge
.1.3:
C2(su)->set port enable ge.1.3
show port alias
Use this command to display the alias name for one or more ports.
Syntax
show port alias [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, aliases for all ports will be displayed.
Mode
Switch command, read ‐ only.
Example
This example shows how to display alias information for ports 1 ‐ 3 on slot 3:
C2(rw)->show port alias ge.3.1-3
Port ge.3.1 user
Port ge.3.2 user
Port ge.3.3 Admin
set port alias
Use this command to assign an alias name to a port.
Syntax
set port alias port-string [ name ]
port ‐ string Specifies the port(s) to enable. For a detailed description of possible port ‐
string values, refer to “ Port String Syntax Used in the CLI ” on page 5 ‐ 2.
port ‐ string (Optional) Displays alias name(s) for specific port(s). For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax
Used in the CLI ” on page 5 ‐ 2.