Enterasys AP2650, Руководство по установке, Страница: 17 / 58

Enterasys Wireless Outdoor APs LEDs
Enterasys Wireless Outdoor AP Installation Guide 1-3
Enterasys Wireless Outdoor APs LEDs
The frontal view of the housing cover displays six LEDs. These LEDs provide information on
operating status. For more information, see the Enterasys Wireless Controller, Access Points and
Convergence Software User Guide .
Figure 1-2 Enterasys Wireless Outdoor AP LEDs
Reset Button
The reset button is located below the housing cover beside the sockets for external antennas as
depicted in Figure 1 ‐ 3 on page 1 ‐ 4. You must remove the housing cover to gain access to the reset
button.
IWLAN Rcoax N-
Connect/SMA Female/
Female Panel
Feedthrough Cabinet feedthrough (SMA female to N female) 6GK5798-0PT00-2AA0
IWLAN Termination
ImpedanceTI795-1R
(Three pieces) Termination Impedance (terminator) 6GK5795-1TR10-0AA6
Table 1-2 Enterasys Wireless Outdoor AP Accessories List (continued)
Product Description
Order # (ordered from
Siemens A&D)
Note: Although the Enterasys Wireless Outdoor AP has six LEDS, only R1, R2 and F LEDs are
used in the current release. The remaining LEDs are disabled.
Warning: You must remove the housing cover only after you have turned off the power supply of
the Enterasys Wireless Outdoor AP. After you have removed the housing cover, you must turn the
power on to use the reset button.