![Ensemble Designs BrightEye 81-F Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/ensemble-designs/brighteye-81-f/brighteye-81-f_user-manual_2414175011.webp)
www.ensembledesigns.com
BrightEye 81-F - Page 11
81-F
3G/HD/SD Optical SDI to HDMI Converter
Operation
BrightEye 81-F provides status indicators on the front panel. Status indicators can also be viewed
remotely from a networked PC with the BrightEye Mac or PC software.
Front Panel Indicators
The front panel of the converter, shown in the figure below, provides status indicators.
BrightEye 81-F Front Panel
Status Indicators
• Input – The incoming format (3G, HD, or SD) will Illuminate green.
BrightEye 81-F support
s
all of the 3G, HD and SD standards listed in the chart in the
"Using the
BrightEye Control Application”
on page 12. The video format is auto detected.
• HDMI – The HDMI LED will indicate cable connection and status as follows:
Green – The HDMI LED will illuminate green when an HDMI cable is connected to a monitor
and the monitor reports back that it supports the incoming format.
Orange – The HDMI LED will illuminate orange when an HDMI cable is connected to a monitor
and the monitor reports back that it does not support the incoming format.
Note: Because many monitors do not report back format support fully or accurately,
BrightEye 81-F will often function properly when the HDMI LED illuminates orange.
Unlit – If the HDMI LED is not illuminated check the cabling between BrightEye 81-F and
the monitor.
• Pwr (Power) – The power indicator illuminates green when the BrightEye unit has power and
the internal voltage regulator is functioning correctly.