EnPro Quincy Compressor QPHT 100, Инструкция по эксплуатации

Страница: 5 / 38

High Temperature Refrigerated Air Dryers
General Information
Quincy Models QPHT 25, 50, 75, 100 and
125 High Temperature Refrigerated Dryers
are designed to cool and remove moisture
from compressed air. The units cool air
in two stages. Compressed air enters the
system at a maximum temperature of
180°F and is cooled in an aftercooler by
ambient air. It is further cooled in an air to
refrigerant heat exchanger to about 40°F.
Once cooled, the air is sent through an
automatic draining moisture separator and
finally through an optional oil filter.
When properly installed, the units require
little maintenance or adjustment. A list
of service parts is provided in the Parts
List and Drawings book (9829 2101 99).
Contact Quincy or your Quincy distributor
for repair or replacement of other parts on
these units.
Warning!
DO NOT install, operate, maintain,
adjust or service this unit without
thoroughly reading this manual.
This manual contains important safety
information. Read THOROUGHLY and
follow the Safety Instructions provided in
this manual and posted on the unit. Keep
this manual near the unit and in a safe
place. Replace this manual if it becomes
torn or dirty and cannot be properly used.
Please read the Operating Instructions
section of this manual before attempting to
operate the unit.
Please read the Maintenance &
Adjustments and Troubleshooting sections
of this manual before beginning any
maintenance or service work on this unit.
Contact Quincy or your Quincy distributor
before performing any service or
maintenance work NOT discussed in this
manual.
DATE OF PURCHASE:
MODEL:
SERIAL NO.:
Record above information from nameplate.
Retain this information for future reference.
Receiving – Inspection
Inspect equipment. Any concealed
shipping damage must be reported to the
carrier immediately. Damage claims should
be filed by the consignee with the carrier.
All the equipment shipped F.O.B. factory
becomes the property of the purchaser. In
all cases of damage, visible or suspected,
contact your local distributor or Quincy
before attempting to install equipment.
SERVICE INQUIRIES: Provide Model
No., Serial No., Operating Pressure, Inlet
Temperature, Nature of Problem. See
Dryer Specification Tag located on the
control panel.
Quincy Compressor-QPHT
1
Back to TOC