Enplus AC022K-BE-24, Руководство пользователя

Страница: 15 / 20

- 14 -
9) Installation Sketch
2.2 Power-on Checking
1) Check before Power-on
Please check the followings before any operation:
1. The charger’s location is easy for operation and repairing.
2. Double confirm the charger is installed properly.
3.
AC input’s current leakage protection switch is reasonable.
4. No other stuff or component left on the top of the charger.
2
）
Power-on Charger
1. Make sure all checking is done according to the above items.
2. Turn on the current leakage protection switch of AC input.
3. Power-on the charger and observe the LED indicator, which should be standby status.
State Description LED Status
Standby Power-on, but no gun plug-in Flashing green, 2S on 2S off
Ready to charge Gun plug-in, but not start charging yet Flashing yellow, 2S on 2S off
In charging Gun plug-in, and start charging by RFID Breathing green, on/off gradually
Stop charging Charging stop, but gun is still plug-in Solid green
Fault Error happens Solid red
Wall-mount Installation: Floor-stand Installation: